Confirm the coil route
State whether you need master coil, slit coil or cut-to-length sheet so width, packing and processing can be quoted correctly.
304 Stainless Steel Coil
304 Stainless Steel Coil
304 Stainless Steel Coil
Supplier
FX Stainless Steel helps buyers review 304 stainless steel coil for stamping, slitting, cut-to-length sheet supply, appliance panels, equipment covers and general manufacturing. Send ASTM A240 304, SUS304, EN 1.4301 or UNS S30400 wording together with thickness, width, surface, coil ID, coil weight, quantity and destination before quotation.
304 / SUS304
Common grade names
ASTM A240
Common flat product standard
2B / BA / No.4 / HL
Surface options
Slitting / CTL
Processing review
Quick Answer
What should buyers confirm for 304 stainless steel coil?
Keep surface separate
2B, BA, No.4 and HL require different surface expectations, protective film choices and inspection methods.
Send coil details
Thickness, width, coil ID, coil weight, edge condition, quantity, MTC requirement and destination are needed for a workable quote.
Buyer Fit
304 coil is for continuous production, not only flat sheet sourcing
304 stainless steel coil is a practical starting material when the buyer needs repeated stamping, slitting, leveling, cut-to-length sheets or manufacturing batches. If the project only needs a few fixed plates, a sheet or plate route may be cleaner. If the factory needs repeat width control and batch feeding, coil supply is usually the better discussion.
Best fit
Stamping, appliance panels, equipment covers, kitchen parts, enclosures, leveling and cut-to-length sheet programs.
Quote checklist
Send grade, standard, thickness, width, coil ID, coil weight, surface, edge condition, quantity and destination.
Supply note
Availability depends on thickness, width, surface route, slitting plan, current coil stock and packing requirement.
Specification Reference
304 stainless steel coil supply reference
| Item | Common Review | Buyer Note |
|---|---|---|
| Grade names | 304 / SUS304 / EN 1.4301 / UNS S30400 | Keep the drawing, PO, MTC and labels aligned when grade wording matters |
| Standards | ASTM A240 / JIS G4305 / EN 10088 / GB/T review | ASTM A240 304 stainless steel coil wording should be confirmed before shipment when required |
| Thickness and width | Cold rolled coil thickness and slit width review | Availability depends on current coil stock, slitting plan and minimum workable width |
| Coil condition | Coil ID / coil weight / edge condition | Confirm inner diameter, maximum coil weight, mill edge or slit edge before production |
| Surface | 2B / BA / No.4 / HL review | Visible surfaces may require protective film, grain direction and pre-shipment inspection |
| Documents and packing | MTC / heat number / labels / export packing | Useful for receiving inspection, import review and downstream batch traceability |
Useful Tool
Open Plate Calculator
Estimate flat sheet weight after coil processing
Use the plate weight calculator when coil will be leveled or cut to sheet sizes for quotation planning.
Applications
Where 304 stainless steel coil is commonly reviewed
Stamping and forming programs
304 coil is often reviewed for repeated stamped parts, covers, appliance components and light industrial manufacturing.
StampingForming
Slit coil for production lines
Slitting support can help buyers match coil width with feeding, bending, roll forming or downstream fabrication equipment.
SlittingCustom width
Cut-to-length sheet supply
Coil can be leveled and cut to sheet size when the buyer needs repeated flat sheet supply from a controlled coil route.
LevelingCut-to-length
Visible panels and covers
2B, BA, No.4 or HL surfaces can be reviewed for appliance panels, covers, interiors and other visible parts.
2B / BANo.4 / HL
Coil / Sheet / Surface Review
How to describe a 304 coil inquiry
Use this table as a sourcing guide. It is not a fixed stock promise because availability depends on thickness, width, surface route, slitting plan and order quantity.
| Inquiry Path | Typical Wording | Common Surface | Typical Use | Buyer Note |
|---|---|---|---|---|
| 304 stainless steel coil | Master coil or standard width coil | 2B / BA | General manufacturing, stamping, leveling | Confirm coil ID, coil weight and edge condition |
| SUS304 stainless steel coil | JIS grade naming for coil orders | 2B / No.4 review | Japan-related drawings, Southeast Asia factories | Confirm whether SUS304 wording must appear on documents |
| 2B 304 stainless steel coil | Cold rolled matte surface coil | 2B | Industrial panels, equipment covers, sheet processing | Confirm whether protective film is required after processing |
| 304 slit coil | Custom width slit coil | As required by order | Production feeding, bending, roll forming | Confirm slit width tolerance, burr expectation and packing |
Inquiry Template
A clear 304 coil inquiry should include coil handling details
A workable inquiry can be written like this: ASTM A240 304 stainless steel coil, 0.8 mm thickness, 1219 mm width, 2B surface, coil ID 508 mm, about 5 MT per coil, mill edge, MTC required, destination Vietnam. Please also quote slit width 300 mm if available. This gives the supplier enough information to review coil route, slitting, packing and documents.
Grade and standard
State 304, SUS304, ASTM A240 304, EN 1.4301, UNS S30400 or the exact drawing requirement.
Coil specification
Send thickness, width, coil ID, coil weight, edge condition, surface finish and protective film requirement.
Commercial details
Add quantity, destination port, MTC requirement, packing request, slitting plan and target delivery timing.
Processing Review
Slitting and cut-to-length change the real buying requirement
A coil quote is not only a grade and thickness quote. If the buyer needs slit coil, the practical supply route depends on width, tolerance, edge condition, burr expectation, packing method and whether each slit coil needs separate labels. If the buyer needs cut-to-length sheet, leveling quality and sheet packing should be checked before shipment.
For slit coil
Confirm final width, tolerance, edge condition, coil ID, maximum coil weight and label requirement.
For cut-to-length
Confirm sheet length, flatness expectation, protective film, packing method and bundle labeling.
For visible surfaces
Confirm 2B, BA, No.4 or HL wording, grain direction and inspection method before production.
Related Pages
Continue with coil, plate and surface finish tools
Stainless Steel Coil
Review the broader coil product range, surfaces, slitting support and export packing options.
304 Stainless Steel Plate & Sheet
Compare the sheet and plate route when the buyer needs fixed flat sizes instead of coil supply.
Stainless Steel Plate
Review plate and sheet grades, cut-to-size support, surface finishes and MTC requirements.
Stainless Steel Surface Finish Guide
Compare 2B, BA, No.4, HL and mirror finish wording before confirming visible coil or sheet orders.
Contact FX Stainless Steel
Send grade, thickness, width, surface, coil ID, coil weight, quantity and destination for review.
FAQ
304 stainless steel coil FAQ
What is 304 stainless steel coil used for?
304 stainless steel coil is commonly reviewed for stamping, slitting, cut-to-length sheet supply, appliance panels, equipment covers, kitchen parts, enclosures and general manufacturing.
What surface finishes are common for 304 stainless steel coil?
2B is common for cold rolled coil. BA, No.4 and HL can be reviewed when the buyer needs a brighter or visible surface. Protective film and grain direction should be confirmed when appearance matters.
What should I send for a 304 stainless steel coil quote?
Send grade wording, standard, thickness, width, coil ID, coil weight, edge condition, surface finish, quantity, destination and MTC requirement. Add slitting or cut-to-length details if processing is needed.
Can 304 stainless steel coil be slit to custom width?
Slitting can be reviewed based on thickness, final width, tolerance, edge condition, coil weight, quantity and packing requirement. Very narrow or special widths should be checked before quotation.
Is MTC available for 304 stainless steel coil?
MTC support can be reviewed for 304 coil orders. Buyers should check grade wording, heat number, standard reference, coil labels and packing list before shipment.
Send thickness, width and coil details for your 304 coil inquiry.
Share whether you need ASTM A240 304, SUS304 or EN 1.4301, plus thickness, width, coil ID, coil weight, surface finish, edge condition, quantity, destination port and MTC requirement.
Contact Sales Team