Pipe Weight Calculator
Enter grade, outer diameter, wall thickness and length to estimate theoretical stainless steel pipe weight.
Enter outer diameter, wall thickness, length and quantity to calculate theoretical weight.
Nominal density by stainless steel grade
Density changes the theoretical result even when two pipes share the same OD and wall. These values are practical nominal references for quotation and freight estimates. If a drawing or customer standard specifies another density basis, use that value.
| Grade | Nominal density | Calculation note |
|---|---|---|
| 304 / 304L | 7.93 g/cm³ | Default selection for common austenitic pipe |
| 303 | 7.93 g/cm³ | Free-machining austenitic bar and turned fittings |
| 316 / 316L | 7.98 g/cm³ | Slightly heavier than 304 at the same dimensions |
| 321 / 347 | 7.93 - 7.96 g/cm³ | Stabilized austenitic grades for high-temperature service |
| 410 / 420 | 7.74 g/cm³ | Martensitic grades; noticeably lighter than austenitic |
| 430 | 7.70 g/cm³ | Ferritic grade for decorative and appliance tube |
| 2205 / 2507 | 7.80 g/cm³ | Duplex nominal reference; confirm with the MTC for project work |
Pipe weight per meter: common OD and wall combinations
Theoretical kg/m at nominal 304/304L and 316/316L density. Inner diameter = OD minus twice the wall thickness; confirm the actual schedule before ordering.
| OD x wall (mm) | Inner diameter (mm) | 304 / 304L kg/m | 316 / 316L kg/m |
|---|---|---|---|
| 25 x 2 | 21 | 1.15 | 1.15 |
| 32 x 2.5 | 27 | 1.84 | 1.85 |
| 48 x 3 | 42 | 3.36 | 3.38 |
| 57 x 3.5 | 50 | 4.66 | 4.69 |
| 76 x 4 | 68 | 7.17 | 7.22 |
| 89 x 4.5 | 80 | 9.47 | 9.53 |
| 108 x 5 | 98 | 12.83 | 12.91 |
| 133 x 6 | 121 | 18.98 | 19.10 |
Example calculation
304 pipe, 60 mm outer diameter, 3 mm wall thickness, 6 m per piece, 10 pieces.
Theoretical result: about 4.260 kg/m, 25.561 kg per piece and 255.61 kg total.Stainless steel pipe weight calculator FAQ
What pipe dimensions do I need?
Use outer diameter, wall thickness, length and quantity. The calculator derives inner diameter automatically.
Can I use this for welded and seamless pipe?
Yes. The weight formula works for round pipe when the outer diameter and wall thickness are known.
Why can actual pipe weight differ from the result?
Actual weight can vary because of dimensional tolerance, ovality, end cutting and production variation.
What should I send for a pipe quotation?
Send pipe type, grade, outer diameter, wall thickness, length, quantity, standard, surface and destination.
Continue with the right pipe page
Stainless Steel Pipe
Review welded and seamless pipe ranges, grades, standards and project support.
Stainless Steel Plate Weight Calculator
Estimate theoretical weight for rectangular stainless steel sheet and plate.
Stainless Steel Bar Weight Calculator
Estimate theoretical weight for round, hex, square and flat stainless steel bar.
How to Use Stainless Steel Calculators
Choose the right weight calculator, tolerance lookup or grade lookup before quotation.
If the calculator is not convenient enough or you think a result may be wrong, please tell us at [email protected].
Need a pipe quote after checking the weight?
Send the pipe type, size, wall thickness, grade, quantity, standard and destination. We can review the practical supply path.
Contact Sales Team